Guarantee
Contact us for price matching
Call us on (03) 98793566
Penrite 10 Tenths Running-In 15W-40 Engine Oil 5L
Running In Oil is a premium mineral, SAE 15W-40, non friction modified, low detergent & dispersant engine oil, designed for the critical running in period for both new, re-manufactured and crate engines. It contains an advanced anti-wear additive pack featuring HIGH ZINC (approx. 3500 ppm levels) for ultimate engine wear protection during these first stages of engine use.
Penrite 10 Tenths Racing products are used by Factory Race Teams to provide the ultimate in performance and protection. To visit our Factory Racing Partners and Penrite Brand Ambassadors Click Here
Running In Oil is designed for use in most types of rebuilt or new engines for on road, off road and stationary applications. It is suitable for use in modern 4, 6 & 8+ cylinder, multi cam, multi-valve including VVT, naturally aspirated, supercharged & turbocharged engines, including light duty diesel engines. It is suitable for use in passenger car, light commercial and motorcycles including four stroke motorcycles with wet clutches.
Running In Oil has a High Zinc formulation to protect the valve train including camshafts, followers, rockers and pushrods. It allows the piston rings to bed in correctly with the cylinder walls, preventing glazing of the bores and it can be used for both dynamometer and normal road run in procedures.
Suggested Running In Process:
Product can be used on road or for dynamometer running in procedures.
ON ROAD , we recommend the oil be used for approximately 500 Kilometres at varied speeds avoiding full throttle applications until the running in process is complete. Post the initial 500 Kilometres, the oil and filter should be changed and the engine re-filled with type of oil that is going to be used going forward.
DYNAMOMETER we recommend running the engine for around 30 minutes at a constant speed of approximately 2000 - 2500 RPM. This should ensure rings and camshaft are properly seated. Post the run in period, the oil and oil filter should be changed to the type that is gong to be used in the engine going forward.
For flat tappet cam shaft lifters use Penrite's Running In Oil 20W-50
Running In Oil may be used in engines where SAE 15W-40, 20W-40, 20W-50 & SAE 30 viscosity grades are specified by the manufacturer. It is designed to be used over a wide range of engine oil viscosities. Its 15W-40 viscosity allows for use in both new and older type engines. It can be used with Petrol, LPG, E10, diesel & other conventional fuels.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush , a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
Help other Auto Surplus users shop smarter by writing reviews for products you have purchased.